Mash
  • News
  • Computer
  • The science
  • Finance
  • Technology
  • Business
  • Internet
XToner – all about computer technology
  • News
  • Computer
  • The science
  • Finance
  • Technology
  • Business
  • Internet

DIY staircase

  • November 5, 2018

The premises of the attic mainly have associations with us with something far and past from childhood. In every private house there was such a place, and the joy of the secret resting of the attic with the company of friends is completely familiar to everyone. They often climbed the attic along the ladder made of wood, which after that was pulled together with the inside of the attic, so as not to draw attention to adults. The attic in most cases was a warehouse of ancient, unused items. And before, it’s not common to whom it could have occurred to equip him, and even more so to make a housing room out of it.

Today, the desire to increase the housing and total area of ​​their own houses and apartments prompted people to reorganize and privatize the premises of the attic. And of course, the equipment of a comfortable and comfortable movement between floors is made important of the issues.

Types of stairs to the attic

stationary;

extending;

folding;

Given the area of ​​the premises at two levels, and the purpose of the further attic floor, they select the most convenient type of systems, as well as the angle of inclination of the stairs. Having selected for yourself what a particularly suitable look, you need to form with the materials from which it must be made. It should be noted that the folding stairs of the sectional type (two or three parts) in most cases are made of wood, but the plus to this is taken into account a large attic between the ceilings. Fastening parts are made of metal. The extending staircase is made only of metal. Both folding and extending stairs are quite convenient to work. Types of control and various designs, a variety of fasteners and details makes it possible to optimize and choose an option applicable to a certain room to the maximum. A staircase for the attic can be made with your own hands.

Selection of Matryal

The selection of mother for production will depend on certain points. To do this, you need to form with a view, width, number of sections, and its working specifics. The purpose of the stairs plays a special role for determining the largest load on the steps. The largest load for wood factory systems will be, on average, 150 kgf. Metal structures can withstand 250 kgf. This, of course, does not mean that when used, you cannot give a load on the steps more, but it is not worth it to do this, because the stairs will quickly fail. The dimensions plus to this do not have to be more. the size of the attic. Pine is a woody material that has to such an extent a strong structure that its selection is so that the stairs to the attic in combination with a metal profile and is a combination of weight and strength. Metal profiles are equipped with plastic inserts, which are smoothed out or not at all allowing lateral sliding.

Staircase management

For work, you will need:

hacksaw;

a finished staircase made of wood above the ceiling 35-40 centimeters;

hinges (the width is installed by the width of the Kosour);

two wood bars (along the width of the span);

two bars (more width of the span per 20cm);

bolts;

self -tapping screws;

iron hook;

Scurgery.

First, bars are attached to the lower and upper end, which is shorter. The upper bar is fixed using loops, the lower “screws. The fasteners must be from the back of the stairs. Visually divided the stairs into 3 parts, and measuring 2/3, the cut is made in the middle between the steps. The cut parts are again connected by hinges on the same side as the upper bar. Brushes of great length, are nailed from the reverse side obliquely to both half of the system, to give it reliability. The drawing of the stairs to the attic can be looked at the picture. The staircase is assigned under the hatch and presses the upper bar against the wall and fixed with the help of bolts. It remains to adapt the hook. The loop is screwed into the Kosour immediately above the cut, it folds and presses against the wall. The hook is screwed to the wall, on the contrary, the loop and hooks on it. Work made – the staircase is ready!

Except stairs for the attic with your own hands. Video

Share
Tweet
Pin it
Share
Share
You May Also Like
View Post

China adds 15 US companies to export control list

  • March 5, 2025
View Post

French industrial group Thales rises in profit

  • March 5, 2025
View Post

Mercedes-Benz cuts staff and social benefits

  • March 5, 2025
View Post

Soon the two -fuel Lada Granta will appear.

  • January 17, 2025
View Post

Types of decreased movement intensity using engineering measures and road design

  • January 13, 2025
View Post

Types of warehouses and storage facilities

  • January 10, 2025
View Post

XC90 SUV from Volvo Corporation

  • January 10, 2025
View Post

Twin blocks – qualitative characteristics

  • January 9, 2025
Featured Posts
  • Plots and villages of Volokolamsk direction.
    • December 23, 2024
  • VAZ 2114 DIY repair .
    • December 26, 2024
  • Wooden house
    • May 25, 2018
  • Cement
    • June 7, 2018
  • Pulling of the ceiling of the car
    • January 9, 2019
Recent Posts
  • ASUS has introduced a mouse with a built-in aroma oil diffuser
    • March 5, 2025
  • Lenovo unveils solar-powered laptop
    • March 5, 2025
  • MacBook Air and iPad Air to feature new processors
    • March 5, 2025
XToner – all about computer technology
  • © 2017-2024 x-toner.com. All Rights Reserved.

Input your search keywords and press Enter.