Even a person who first decided to put a parquet board in his house becomes clear that this process is very laborious. After laying the parquet, a mandatory step is to align the surface and subsequent grinding. Professional builders call these stages of work by cycle and grinding.
If you decide to entrust the styling of a new or the restoration of the old parquet for a private master or even try to do everything with your own hands, as you inevitably lose and spend a lot of time. To obtain a quick, and most importantly, beautiful and durable result, professional tools are needed. The full set of special equipment for working with a parquet board can only afford quite large brigades specializing in this area, such as specialists from the site .
What tools are needed to process parquet boards?
The cycles process is the removal of the upper layer from the parquet board. This is necessary to remove protrusions and small defects of the parquet floor. For cycling, rough sandpaper and a special cycle machine are used.
To date, the construction market presents cycling machines of several types and structures. One of the most popular and most universal designs is a drum type cycling machine. The popularity of this model is the possibility of processing parquet and in the cyclovis and grinding.
A grinding apparatus copes with small roughnesses of the floor surface. For rough and hard surfaces, tape grinding machines are usually used. They are great for processing large rooms. These devices are equipped with switching speeds of the grinding tape, which greatly simplifies the work and allows you to work at the required pace.
To process hard -to -reach places, a third tool is needed – an angular grinding machine. With its help, corners and thresholds are processed. Corner grinding devices have gained popularity due to the variety of options and a wide area of application. This type of machine has a replaceable working element, which allows you to adjust the device for current needs.
Sometimes, even at the final stage of work, it becomes clear that after covering the parquet floor with a varnish, the surface will have to be treated again. For such cases, a flat-grinding machine is usually used, the processing of which will delicately remove the excess varnish, without violating the integrity of the protective and decorative layer.
Another useful tool for cycling is a disk machine. They are produced complete with one or three discs and are used to process the parquet board after varnish covering. Thanks to many additional nozzles, these disk machines began to successfully replace the angular grinding devices.