The window closes loosely? Cold air and rain drops enter the room? Everything is clear, the castle on the window needs to be repaired. Even a small gap in the frame leads to a loss of tightness. This malfunction can be eliminated by placing a new cover. A worn device will become a model for buying a new. Small discrepancies in size can be eliminated during installation. But still there is no need to buy smaller sizes. After all, it is clear that it is easier to increase the recess than to reduce the lid.
For repair work, various types of tools are needed, including pneumatic and hydraulic. One of the universal types of tools are pneumons. Pneumatic sections and Gaikovert Hydraulic at competitive prices are presented by MARIMEX offers a large selection of warehous and hydraulic gayworms in Moscow with delivery in Russia.
Change the sping
First of all, it is necessary to close the old holes from the screws. To do this, pour glue into the recesses, align the resulting surface with a chisel. In the same tool, increase the old nest in size of the new castle. The ability of the roller spike to closing will increase if you shift the lid a little, literally by 1 millimeter inside the fold. If it turned out that the distance between the frame and the sash is more than three millimeters, then it is necessary to put a piece of thin plywood so that these parts of the windows come closer to each other. For even greater strength, you can screw fasteners with a semicircular head. With a hidden head in this case, the screws will not work, because the thickness of the walls is insignificant. Please note that the upper part of the screws is not near the roller spike. To be completely confident in your work, apply glue to the place of fastening. Only in the future can this complicate the work of dismantling the spinger.
