What to do if one air conditioner for air conditioning is not enough, and there is no time to install several units of equipment at all? This situation was provided by almost all air conditioners’ manufacturers. Therefore, today, to solve this problem, it will be advisable to purchase a multi split system that will cope with this task without any problems. You can buy such a system in any specialized company for the sale of multi -split systems.
What is multi split systems and with what they are “eaten”? Multi split systems appeared relatively recently, but almost immediately won the sympathy of millions of users. Their essence is that this equipment uses only one external unit and up to 7 internal, as, for example, Daikin. For this system, it is not necessary to use only wall or only floor internal blocks. They can easily be combined by installing, for example, wall and floor blocks. So air conditioning will be carried out evenly throughout the entire area. The advantage of one external unit is also that it will not spoil the design of the architecture of the building, as it could do 2 or 3 blocks. Due to the fact that the external unit is only one, its power should be high so that it can process all the internal blocks in the same size. The blocks are connected to each other with the help of highways in which the freon is located. The level and pressure of the freon decrease over time, so you need to check and refue the routes once every 2 years. This is carried out using special equipment, which is used by installation services, as well as to correctly install air conditioning. By the way, to trust this process and maintenance, as well as cleaning the air conditioner, only qualified services need to be, otherwise the equipment will be wrong, and malfunctions will often arise in its work.
Multi split systems can consist of one or more compressors. If the system is one -compressor, then the process of processing information from internal blocks occurs through digital channels. This information is processed, and on its basis the operating mode of the inverter compressor is determined. If the multi -compressor system is used, then the external unit controller receives signals from internal blocks and already on the basis of processing these signals controls the inverter or non -intelligent compressor, as well as the fan.
As for the cost of a multi -split systems, it will be slightly higher than the one that could be when buying ordinary split systems. Saving only on the installation of equipment. Any air conditioning requires regular maintenance. Due to the fact that condensate from water occurs on the evaporator and turbine, these parts are covered with mold, and when the air conditioner works, they fly around the room. If you do cleaning after the right time, there will be no such problem. In general, such systems are high -quality and durable.
