All storage facilities must comply with regulatory instructions in connection with the storage of finished products in them. Therefore, the construction of warehouse premises requires adhere to the storage of certain products or materials. Depending on the purpose, the warehouse starts from the preparation of the construction site for the foundation, on which the main frame of the metal building is mounted. There are several constructive ways of building warehouses made of metal -stone structures. Phased mounting with large finished blocks and frame structures.
The construction of the metal -boob production room, like each construction, begins with the installation of a reliable foundation on which a metal frame structure is installed, ready for skin and roof to heat -insulating moisture -proof sandwich. Missing structures belong to light buildings, therefore, the foundation for a metal -stone warehouse can be created without deep lowering. But each warehouse has strict requirements for the optimal microclimate in the premises, and above all, the requirements for dryness. Moisture is the main enemy of all products and building materials. Therefore, the requirement for the foundation begins with high -quality waterproofing of the foundation and floor from water and moisture. Sometimes to protect warehouse premises from rain and flood water, a continuous filling of the foundation and the first floor to a height of at least the level of alleged flooding floods are created. Waterproofing polyvinyl chloride films and bituminous mastics are used as the protection of the foundation from water.
In the construction of storage rooms from scrap -shaped sandwich -panels are the highest quality material for quick assembly of the finished product warehouse. Ready -made sandwich blocks – panels consist of two metal sheets and a layer of heat -insulating material. Metal sheets are covered with a special anti -corrosion coating. For thermal insulation, environmentally friendly material is used, which allows you to store food products. The only drawback of the sandwich – panels are their slight strength, which is not designed for heavy loads and mechanical stress. A warehouse of metal -stone structures is a rapidly vested building that supports a stable microclimate that is required to store finished products or materials.