Bamper is one of the most suffering parts of the car. And regardless of whether the car got into an accident or simply from time to time, but the bumper, like all its other details, has the ability to lose its original appearance. You can fix defects on the bumper by polishing. This procedure does not require special skills and it can be carried out independently, for this you will need:- shampoo for the car;
– Political machine;
– Coarse – and finely ambitious pastes;
– Soft and dry piece of matter;
– A means containing wax or Teflon;
– Polishing agent.
Surely every person wants him to have his own personal car. But before the network is behind the wheel, and you need to feel sure you need to get a driver’s license. If you live in Moscow, then for you it will not be difficult for you, a driving school in Yuzao provides its students with the best training in the city at the lowest prices.
The sequence of the polishing process.
1. To make it more convenient to carry out the Bumper polishing procedure is best removed from the car body. It must be thoroughly washed with a special shampoo for the car and leave until completely dry. The fully dried bumper surface is degreased using a solvent.
2. On a polish machine, install a circle designed for rough polishing. Apply a small amount of large -carbon paste to it and with progressive movements at the minimum speed of the polishing machine to distribute it over the entire surface of the bumper.
3. Continue the polishing of the bumper at a higher speed of about 2500 revolutions per minute. In this case, it is necessary to control the stage of heating the surface of the bumper in order to avoid damage to the paintwork layer. After the end of this procedure, the remaining paste must be erased from the bumper using soft and dry matter.
4. The next stage of polishing is the application of a small -amatee paste to the surface of the bumper. On the polish machine, install the corresponding circle and continue the polishing process similarly to the previously described.
5. After the entire polishing procedure is completed. You can begin to process the surface of the bumper with a special tool, which includes wax or Teflon. This remedy will give the bumper the initial shine and strengthen the water -repellent properties.
6. The final stage will be the application of the polishing agent. Install a foam circle on the polish machine, and apply a polishing agent to the bumper, distributing it evenly over the entire surface so that there are no clots left. Put a polishing machine at the average speed and carefully walk throughout the bumper, rubbing the polishing agent over its entire surface.
7. At the end of the polishing procedure, it is necessary to check the surface of the bumper for defects using artificial and natural light.
It is best done in polishing the bumper in a ventilated and light room. You can polish without removing the bumper from the car, but in this case the car will have to be washed completely, after which all the parts of the car located next to the bumper are closed or glued.