People, enterprises and socially significant objects need water supply.
The Diamond 63 campaign makes it possible to fulfill the dream of each owner of his own home, cottage in Samara and its environs – to provide housing with water.
Performs work
Its main function is the drilling of wells in Samara for autonomous water supply.
Using the Hammer Autonomous hydraulic machine, well drilling is carried out to a depth of 30 meters, and the URB 2A2 ″ machine allows you to reach a depth of 150 meters.
In addition to drilling wells, the campaign also performs water eyeliner into the house.
Installs equipment
To protect the well from groundwater, freezing and rodents, to accommodate cleaning filters and tanks, the campaign offers the installation of a caisson.
Depending on the well and purpose, experts will select a pump for narrow wells, a pump that provide maximum water pressure, as well as for clean water and water with impurities.
You can mount the manufacturers of Wester, Reflex, Jlexe and others that will provide:
storage of additional water volume,
Smooting of a hydraulic jacket,
reduction in the number of inclusions and load on the pump.
New well for less money
Cheaper and easier to repair than to build again. For resuscitation, the campaign specialists will perform work such as: cleaning the well and bottom from sand, small gravel, silt, organics, removal of rust from the pipe or mesh of the filter.
These operations are performed using a hydrodynamic apparatus, an electro-hydroxypulse installation and air supply under high pressure for 6-8 hours and, according to a number of work, without arrival at the site.
Is it possible by the old fashioned way, without pipes and technology?
The company’s specialists have the necessary knowledge, experience and equipment for digging wells. Depending on the depth of groundwater, a well will be dug in 2-7 days, concrete rings are mounted and a well house is installed.
Specialists of the company Almaz 63, in addition to drilling wells in Samara, perform the following set of works related to water supply:
connecting the well to the house,
Wiring pipes of water supply,
laying of a special heating cable,
Installation of gas columns and boilers,
Installation and commissioning of water filters,
Installation and complete configuration of automation and plumbing work,
Warranty service.
Now about prices. It all depends on the soil and the depth of drilling, therefore, the cost is from 1600 to 3000 rubles. For the linear meter.
To communicate with the consultant, you can use the communication form: Tel.8-917-107-55-45
Campaign website:
